Bollettini di servizio
Bollettini di servizio e direttive di aeronavigabilità per tutti gli aeromobili Bristell. Aggiornati regolarmente da BRM AERO.
Famiglia Bristell B23
27 di 27 bollettini| N. bollettino | Classificazione | Emesso / Revisionato | Titolo e descrizione del bollettino | Aeromobili interessati | Scarica |
|---|---|---|---|---|---|
| B23-SBM-0-0-0-ALL-0005-2026 | Potrebbe diventare AD This SB could be made mandatory by an EASA Airworthiness Directive (AD) | 20.03.2026 | VISUAL INSPECTION OF NOSE LANDING GEAR LEG FOR CRACKS IN WELDSVisual inspection of aircraft nose landing gear leg for possible cracks, especially in areas around welds. | BRISTELL B23 (all models: B23, B23-912iS, B23-915, B23-915 IFR, B23-916) | |
| ADxC-73-SB-021, Issue A4 | Informativo Service bulletin B23 Approved Publications (AFM, AMM, SB) | 23.07.2024 | B23 Approved Publications (AFM, AMM, SB) Service BulletinB23 Approved Publications (AFM, AMM, SB) | All serial numbers of Bristell B23 TCDS EASA.A.642 | |
| ADxC-73-SB-024_C | Informativo Service bulletin | 23.07.2024 | Service Bulletin Software B23Software update by avionic system manufacturer | All B23 aircraft, TCDS EASA.A.642 | |
| ADxC-73-SB-044, Issue A | Facoltativo Service bulletin for convenience or option | 14.05.2024 | Bristell B23 - Exhaust retrofit Reduction of Exhaust back pressureOptional retrofit of exhaust system with higher diameter tubing (DC-110). , Optional retrofit of exhaust system and silencer with higher diameter tubing (DC-115) with corresponding changes to the DC-110 exhaust system and front… | Applicable to all serial numbers of Bristell B23 and B23-912-G500 - TCDS EASA.A.642 | |
| ADxC-DC-73-114 | Informativo Service bulletin | 01.02.2024 | Fuel grade UL91 avoidanceStrong advice to avoid using fuel grade UL91 on Bristell B23 with Rotax 912. | All Bristell B23 TCDS EASA.A.642 with Rotax 912 | |
| ADxC-73-SB-041_A | Potrebbe diventare AD Service bulletin — This SB could be made mandatory by an EASA AD | 04.01.2024 | Trim Indication PlacardsCheck the Elevator Trim Position Indicator placard if in accordance with the AFM. | All Bristell B23 and B23-915 aircraft | |
| ADxC-73-SB-037_B | Potrebbe diventare AD Service bulletin — This SB could be made mandatory by an EASA AD | 24.11.2023 rev. 22.03.2024 | Electric system incl. drawingsCorrection of (potential) non-conformities and design rectifications Rev.B: Compliance time added | All Bristell B23 aircraft | |
| ADxC-73-SB-039_A | Facoltativo Service bulletin for convenience or option | 23.11.2023 | Elevator and tab deflections tolerance and gurney flapUpdate of documentation. Optional improvement of low speed trim range | All Bristell B23-915 aircraft | |
| ADxC-73-SB-035_A | Consigliato Service bulletin recommended to be accomplished to prevent significant operational disruptions | 17.07.2023 | Avoid engine stress ROTAX 912Recommended power settings to avoid engine stress ROTAX 912 | All Bristell B23 aircraft | |
| ADxC-73-SB-036 | Facoltativo Service bulletin — for convenience or option | 27.06.2023 | Update tow winch system installationOptional update of the tow winch system - Change of guillotine control handle surface to be knurled - Retrofit of a tail skid to the tow winch system at rear fuselage | All BRM Aero B23 models and serial numbers with DC-025 (DC-003: B23-915 with tow winch system), or DC-076 (DC-049/058: B23-915 G500 with tow winch system) | |
| ADxC-73-SB-034 | Consigliato Service bulletin recommended to be accomplished to prevent significant operational disruptions | 31.05.2023 | Propeller mounting inspectionDegrease contact area between propeller and engine | All BRM Aero B23 models and serial numbers | |
| ADxC-73-SB-033 | Consigliato Service bulletin recommended to be accomplished to prevent significant operational disruptions | 22.05.2023 | Chafing-protection of seat bracketProtection against chafing of the solid rivets heads on the main center spar and of the spar web from the seat brackets | All BRM Aero B23 models and serial numbers | |
| ADxC-73-SB-025 | Informativo Service bulletin | 06.03.2023 | Installation governor for ROTAX 915iS enginesInstallation governor for ROTAX 915iS engines | All B23 models, equipped with ROTAX 915iSc3 A engines | |
| ADxC-73-SB-032 | Obbligatorio This service bulletin is mandatory and must be applied immediately to all aircrafts concerned. | 24.02.2023 | Caliper piston seals replacementCaliper piston seals replacement | All Bristell B23 aircraft | |
| ADxC-73-SB-007_A1 | Informativo Service bulletin | 23.02.2023 | Implementation of DC-023 CO sensorInstallation of CO-sensor DC-023 | All Bristell B23 aircraft | |
| ADxC-73-SB-029 | Obbligatorio This SB is mandatory as per EASA AD | 09.02.2023 rev. 17.10.2023 | Removal or Change of ballast attached to engine Note: this service bulletin also replaces ADxC-73-SB-020.AInsufficient or loss of attachment bolt torque can lead to excessive wear on attachment bolt shaft and cracks of attachment lugs due to resulting pounding vibration. This, if undetected over long period of time, could lead to partial… Revision B (Change Nr.: ADxC-73-DC-105) | All Bristell B23 aircraft | |
| ADxC-73-SB-023 | Facoltativo Service bulletin for convenience or option | 10.01.2023 | Installation of glare shield with handlesDC-067 introduced the option of glare shield with handles in production. By this service bulletin, this option is made available for retrofit. | All Bristell B23 aircraft | |
| ADxC-73-SB-024 | Consigliato Service bulletin recommended to be accomplished to introduce improvements | 10.01.2023 | Approved software / Software updateThis service bulletin informs operators and maintenance organizations with respect to the approved software versions for the B23 aircraft. | All Bristell B23 aircraft | |
| ADxC-73-SB-020 | Annullato Service bulletin recommended to be accomplished to prevent significant operational disruptions | 09.01.2023 rev. 10.10.2023 | Inspection and change of ballast attached to engineCANCELLED by Revision B — superseded by ADxC-73-SB-029 Issue B. Originally: optional ballast change at engine (design change ADxC-73-DC-005/-007) for B23 with Rotax 912, enabling more loading flexibility within the unchanged weight and balance envelope. Revision B (Change Nr.: ADxC-73-DC-105) | All Bristell B23 models with Rotax 912. | |
| ADxC-73-SB-018 | Consigliato Service bulletin recommended to be accomplished to prevent significant operational disruptions | 14.10.2022 | Aileron AP system improvementImprovement of the bracket connection (also called “sleeve”) connecting the aileron AP push rod with the aileron control system. | All BRM Aero B23 models and serial numbers with installed auto pilot system. | |
| ADxC-73-SB-019 | Informativo Service bulletin to introduce improvements | 20.09.2022 | Editorial change of the AFMFor model Bristell B23: Update cabin smoke procedure. Editorial endorsement of fuel type. Update of Carburettor heat use in normal procedures. List of supplements. | All serial numbers of Bristell B23 and Bristell B23-915 TCDS EASA.A.642 | |
| ADxC-73-SB-015 | Facoltativo Service Bulletin for convenience or option | 26.08.2022 | Replacement of oil cooler DC-045Increase of cooling capacity of the oil cooler for hot and high operation for ROTAX Engine Type 912 (Series). Under very hot and high conditions with prolonged engine run on ground, as well as prolonged climbs at low speeds, the oil… | All BRM Aero B23 with 912 series engines installed | |
| ADxC-73-SB-014 | Facoltativo Service Bulletin for convenience or option | 21.04.2022 | Replacement of fuel filler neck placard- Addition of fuel grade AVGAS UL91 to the corresponding section in the AFM - Replacement of fuel filler neck placards according to ADxC-DC-73-046 - Replacement of AFM ADxC-73-001-AFM by latest revision B | B23 All aircraft | |
| ADxC-73-SB-013 | Facoltativo Service Bulletin for convenience or option | 11.04.2022 | Replacement of fuel filler neck placard- Addition of fuel grade AVGAS UL91 to the corresponding section in the AFM - Replacement of fuel filler neck placards according to ADxC-DC-73-042 - Replacement of AFM ADxC-73-003-AFM by latest revision B | B23-915 All aircraft | |
| ADxC-73-SB-012_A | Informativo Service bulletin to introduce improvements | 18.02.2022 | Replacement of wheel pant bracketsTo improve the durability of the parts, the surface protection is changed from zink – plating to normal painting. | All B23, B23-915 models | |
| ADxC-73-SB-008 | Informativo Service Bulletin to introduce improvements | 13.08.2021 | AFM changesChanges of the AFM: Increase of demonstrated cross wind performance 9kts →15kts corrections of typos, correction of current warning trigger values, minor wording, addition of GDU460 to the MMEL AFM download:… | B23 All aircraft | |
| ADxC-73-SB-004 | Informativo Service Bulletin | 24.02.2021 | Implementation of optional water coolant heaterImplementation of optional water coolant heater DEFA and subsequent 411423, corresponding extension cable furnishing of AFM and AMM supplements | All Bristell B23 aircraft |
- Potrebbe diventare AD
N. bollettino
B23-SBM-0-0-0-ALL-0005-2026
VISUAL INSPECTION OF NOSE LANDING GEAR LEG FOR CRACKS IN WELDS
This SB could be made mandatory by an EASA Airworthiness Directive (AD)
Visual inspection of aircraft nose landing gear leg for possible cracks, especially in areas around welds.
- Emesso
- 20.03.2026
- Interessati
- BRISTELL B23 (all models: B23, B23-912iS, B23-915, B23-915 IFR, B23-916)
- Informativo
N. bollettino
ADxC-73-SB-021, Issue A4
B23 Approved Publications (AFM, AMM, SB) Service Bulletin
Service bulletin B23 Approved Publications (AFM, AMM, SB)
B23 Approved Publications (AFM, AMM, SB)
- Emesso
- 23.07.2024
- Interessati
- All serial numbers of Bristell B23 TCDS EASA.A.642
- Informativo
N. bollettino
ADxC-73-SB-024_C
Service Bulletin Software B23
Service bulletin
Software update by avionic system manufacturer
- Emesso
- 23.07.2024
- Interessati
- All B23 aircraft, TCDS EASA.A.642
- Facoltativo
N. bollettino
ADxC-73-SB-044, Issue A
Bristell B23 - Exhaust retrofit Reduction of Exhaust back pressure
Service bulletin for convenience or option
Optional retrofit of exhaust system with higher diameter tubing (DC-110). , Optional retrofit of exhaust system and silencer with higher diameter tubing (DC-115) with corresponding changes to the DC-110 exhaust system and front…
- Emesso
- 14.05.2024
- Interessati
- Applicable to all serial numbers of Bristell B23 and B23-912-G500 - TCDS EASA.A.642
- Informativo
N. bollettino
ADxC-DC-73-114
Fuel grade UL91 avoidance
Service bulletin
Strong advice to avoid using fuel grade UL91 on Bristell B23 with Rotax 912.
- Emesso
- 01.02.2024
- Interessati
- All Bristell B23 TCDS EASA.A.642 with Rotax 912
- Potrebbe diventare AD
N. bollettino
ADxC-73-SB-041_A
Trim Indication Placards
Service bulletin — This SB could be made mandatory by an EASA AD
Check the Elevator Trim Position Indicator placard if in accordance with the AFM.
- Emesso
- 04.01.2024
- Interessati
- All Bristell B23 and B23-915 aircraft
- Potrebbe diventare AD
N. bollettino
ADxC-73-SB-037_B
Electric system incl. drawings
Service bulletin — This SB could be made mandatory by an EASA AD
Correction of (potential) non-conformities and design rectifications Rev.B: Compliance time added
- Emesso
- 24.11.2023 · rev. 22.03.2024
- Interessati
- All Bristell B23 aircraft
- Facoltativo
N. bollettino
ADxC-73-SB-039_A
Elevator and tab deflections tolerance and gurney flap
Service bulletin for convenience or option
Update of documentation. Optional improvement of low speed trim range
- Emesso
- 23.11.2023
- Interessati
- All Bristell B23-915 aircraft
- Consigliato
N. bollettino
ADxC-73-SB-035_A
Avoid engine stress ROTAX 912
Service bulletin recommended to be accomplished to prevent significant operational disruptions
Recommended power settings to avoid engine stress ROTAX 912
- Emesso
- 17.07.2023
- Interessati
- All Bristell B23 aircraft
- Facoltativo
N. bollettino
ADxC-73-SB-036
Update tow winch system installation
Service bulletin — for convenience or option
Optional update of the tow winch system - Change of guillotine control handle surface to be knurled - Retrofit of a tail skid to the tow winch system at rear fuselage
- Emesso
- 27.06.2023
- Interessati
- All BRM Aero B23 models and serial numbers with DC-025 (DC-003: B23-915 with tow winch system), or DC-076 (DC-049/058: B23-915 G500 with tow winch system)
- Consigliato
N. bollettino
ADxC-73-SB-034
Propeller mounting inspection
Service bulletin recommended to be accomplished to prevent significant operational disruptions
Degrease contact area between propeller and engine
- Emesso
- 31.05.2023
- Interessati
- All BRM Aero B23 models and serial numbers
- Consigliato
N. bollettino
ADxC-73-SB-033
Chafing-protection of seat bracket
Service bulletin recommended to be accomplished to prevent significant operational disruptions
Protection against chafing of the solid rivets heads on the main center spar and of the spar web from the seat brackets
- Emesso
- 22.05.2023
- Interessati
- All BRM Aero B23 models and serial numbers
- Informativo
N. bollettino
ADxC-73-SB-025
Installation governor for ROTAX 915iS engines
Service bulletin
Installation governor for ROTAX 915iS engines
- Emesso
- 06.03.2023
- Interessati
- All B23 models, equipped with ROTAX 915iSc3 A engines
- Obbligatorio
N. bollettino
ADxC-73-SB-032
Caliper piston seals replacement
This service bulletin is mandatory and must be applied immediately to all aircrafts concerned.
Caliper piston seals replacement
- Emesso
- 24.02.2023
- Interessati
- All Bristell B23 aircraft
- Informativo
N. bollettino
ADxC-73-SB-007_A1
Implementation of DC-023 CO sensor
Service bulletin
Installation of CO-sensor DC-023
- Emesso
- 23.02.2023
- Interessati
- All Bristell B23 aircraft
- Obbligatorio
N. bollettino
ADxC-73-SB-029
Removal or Change of ballast attached to engine Note: this service bulletin also replaces ADxC-73-SB-020.A
This SB is mandatory as per EASA AD
Insufficient or loss of attachment bolt torque can lead to excessive wear on attachment bolt shaft and cracks of attachment lugs due to resulting pounding vibration. This, if undetected over long period of time, could lead to partial…
- Emesso
- 09.02.2023 · rev. 17.10.2023
- Interessati
- All Bristell B23 aircraft
- Facoltativo
N. bollettino
ADxC-73-SB-023
Installation of glare shield with handles
Service bulletin for convenience or option
DC-067 introduced the option of glare shield with handles in production. By this service bulletin, this option is made available for retrofit.
- Emesso
- 10.01.2023
- Interessati
- All Bristell B23 aircraft
- Consigliato
N. bollettino
ADxC-73-SB-024
Approved software / Software update
Service bulletin recommended to be accomplished to introduce improvements
This service bulletin informs operators and maintenance organizations with respect to the approved software versions for the B23 aircraft.
- Emesso
- 10.01.2023
- Interessati
- All Bristell B23 aircraft
- Annullato
N. bollettino
ADxC-73-SB-020
Inspection and change of ballast attached to engine
Service bulletin recommended to be accomplished to prevent significant operational disruptions
CANCELLED by Revision B — superseded by ADxC-73-SB-029 Issue B. Originally: optional ballast change at engine (design change ADxC-73-DC-005/-007) for B23 with Rotax 912, enabling more loading flexibility within the unchanged weight and balance envelope.
- Emesso
- 09.01.2023 · rev. 10.10.2023
- Interessati
- All Bristell B23 models with Rotax 912.
- Consigliato
N. bollettino
ADxC-73-SB-018
Aileron AP system improvement
Service bulletin recommended to be accomplished to prevent significant operational disruptions
Improvement of the bracket connection (also called “sleeve”) connecting the aileron AP push rod with the aileron control system.
- Emesso
- 14.10.2022
- Interessati
- All BRM Aero B23 models and serial numbers with installed auto pilot system.
- Informativo
N. bollettino
ADxC-73-SB-019
Editorial change of the AFM
Service bulletin to introduce improvements
For model Bristell B23: Update cabin smoke procedure. Editorial endorsement of fuel type. Update of Carburettor heat use in normal procedures. List of supplements.
- Emesso
- 20.09.2022
- Interessati
- All serial numbers of Bristell B23 and Bristell B23-915 TCDS EASA.A.642
- Facoltativo
N. bollettino
ADxC-73-SB-015
Replacement of oil cooler DC-045
Service Bulletin for convenience or option
Increase of cooling capacity of the oil cooler for hot and high operation for ROTAX Engine Type 912 (Series). Under very hot and high conditions with prolonged engine run on ground, as well as prolonged climbs at low speeds, the oil…
- Emesso
- 26.08.2022
- Interessati
- All BRM Aero B23 with 912 series engines installed
- Facoltativo
N. bollettino
ADxC-73-SB-014
Replacement of fuel filler neck placard
Service Bulletin for convenience or option
- Addition of fuel grade AVGAS UL91 to the corresponding section in the AFM - Replacement of fuel filler neck placards according to ADxC-DC-73-046 - Replacement of AFM ADxC-73-001-AFM by latest revision B
- Emesso
- 21.04.2022
- Interessati
- B23 All aircraft
- Facoltativo
N. bollettino
ADxC-73-SB-013
Replacement of fuel filler neck placard
Service Bulletin for convenience or option
- Addition of fuel grade AVGAS UL91 to the corresponding section in the AFM - Replacement of fuel filler neck placards according to ADxC-DC-73-042 - Replacement of AFM ADxC-73-003-AFM by latest revision B
- Emesso
- 11.04.2022
- Interessati
- B23-915 All aircraft
- Informativo
N. bollettino
ADxC-73-SB-012_A
Replacement of wheel pant brackets
Service bulletin to introduce improvements
To improve the durability of the parts, the surface protection is changed from zink – plating to normal painting.
- Emesso
- 18.02.2022
- Interessati
- All B23, B23-915 models
- Informativo
N. bollettino
ADxC-73-SB-008
AFM changes
Service Bulletin to introduce improvements
Changes of the AFM: Increase of demonstrated cross wind performance 9kts →15kts corrections of typos, correction of current warning trigger values, minor wording, addition of GDU460 to the MMEL AFM download:…
- Emesso
- 13.08.2021
- Interessati
- B23 All aircraft
- Informativo
N. bollettino
ADxC-73-SB-004
Implementation of optional water coolant heater
Service Bulletin
Implementation of optional water coolant heater DEFA and subsequent 411423, corresponding extension cable furnishing of AFM and AMM supplements
- Emesso
- 24.02.2021
- Interessati
- All Bristell B23 aircraft
Nessun bollettino corrisponde alla ricerca. Cancelli la ricerca o selezioni Tutti i modelli.
Bristell Ultraleggeri e LSA
11 di 11 bollettini| N. bollettino | Classificazione | Emesso / Revisionato | Titolo e descrizione del bollettino | Aeromobili interessati | Scarica |
|---|---|---|---|---|---|
| ALL-SBM-0-0-0-DE-0006-2026 GERMANY ONLY | Obbligatorio Mandatory service bulletin | 20.03.2026 | CG RANGE CHANGECompliance of aircraft with weight and CG limits specified in German Kennblatt 66253 | BRISTELL LSA (Ultra-light category aircraft) All models listed in German Kennblatt 66253 Issue 12 or later | |
| ALL-SA-0-0-0-ALL-0004-2025 | Obbligatorio Mandatory service bulletin — Safety directive/alert | 17.07.2025 | Nose wheel steering inspectionNose wheel steering inspection Kontrola řízení příďového kola | Models with fixed tricycle landing gear with steerable nose wheel | |
| ALL-SB-0-0-0-CZ-0003-2025 | Obbligatorio Mandatory Service Bulletin | 14.07.2025 | Front undercarriage inspectionVisual inspection of the front undercarriage leg and fork for possible cracks, especially around welds and for deformation. | All models with fixed tricycle landing gear | |
| ALL-SB-0-0-0-0-0001-2025 | Obbligatorio Mandatory Service Bulletin — Safety Directive/Alert | 04.02.2025 | Rivets check inside of the frameMissing rivets were found in the internal fuselage structure. | Affected models and serial numbers listed in the bulletin (PDF) | |
| ALL-SB-0-0-0-DE-0002-2024 GERMANY ONLY | Obbligatorio Mandatory Service Bulletin | 19.07.2024 | Control surfaces deflectionIt was found that the deflections of the ailerons are not in the specified range. Measurement/adjustment of control surfaces deflections. | All models listed in German Kennblatt 66253: • LSA, LSA-915 • LSA-K,LSA-K-RG,LSA-K-915,LSA-K-RG-915 | |
| ALL-SA-5-0-0-ALL-0001-2024 | Obbligatorio SAFETY DIRECTIVE/ALERT | 08.02.2024 | ROTAX 912 IS Engine AttachmentEngine attachment inspection, screw replacement. Kontrola uchycení motoru, výměna šroubů. | All models equipped with Rotax 912 iS engine and the original one-piece engine mount. | |
| 22112 Rev. A | Obbligatorio Mandatory Service Bulletin | 28.11.2022 | Automatic Trim/GDU™ 4XX ResetIn G3X, G3X Touch, and G5 systems with GSA 28 autopilot servos connected to trim actuators, an uncommanded automatic trim runaway may occur when the autopilot is first engaged. Software update required | All Bristell experimental, ultralight, and Light-Sport Aircraft fitted G3X, G3X Touch, and G5 systems | |
| ALL-SA-0-0-0-ALL-0002-2021 | Obbligatorio Safety directive/Safety alert | 11.11.2021 | Seat attachmentSeat attachment brackets replacement. Výměna konzol uchycení sedačky. | All UL and LSA models of BRISTELL | |
| ALL-SA-0-0-0-0001-2020 | Obbligatorio Safety Alert Directive | 07.08.2020 rev. 07.12.2022 | AOI revisionChange of crew arm for aeroplane C.G. calculation. (Rev.1 – Re-classification to Safety Directive on FAA request) Rev.2: MAC origin distance correction Rev. 2 — MAC origin distance correction (Rev. 1: re-classification to Safety Directive on FAA request) | All BRISTELL aircraft. | |
| ALL-SA-0-0-0-0005-2020 | Obbligatorio Safety Alert | 11.05.2020 | KAVLICO PRESSURE SENSORSPotential leak of Kavlico pressure sensors Možný únik snímačů tlaku Kavlico | All BRISTELL aircraft fitted with Kavlico pressure sensors. | |
| ALL-SA-3-0-5-0001-2017 | Obbligatorio Safety Alert | 05.10.2017 | ELEVATOR CONTROL STUCKElevator servo rod check Kontrola táhla serva výškovky | All BRISTELL aircraft fitted with Rotax 912 iS, iS Sport, Rotax 914 engines and an autopilot. |
- Obbligatorio
N. bollettino
ALL-SBM-0-0-0-DE-0006-2026
GERMANY ONLYCG RANGE CHANGE
Mandatory service bulletin
Compliance of aircraft with weight and CG limits specified in German Kennblatt 66253
- Emesso
- 20.03.2026
- Interessati
- BRISTELL LSA (Ultra-light category aircraft) All models listed in German Kennblatt 66253 Issue 12 or later
- Obbligatorio
N. bollettino
ALL-SA-0-0-0-ALL-0004-2025
Nose wheel steering inspection
Mandatory service bulletin — Safety directive/alert
Nose wheel steering inspection Kontrola řízení příďového kola
- Emesso
- 17.07.2025
- Interessati
- Models with fixed tricycle landing gear with steerable nose wheel
- Obbligatorio
N. bollettino
ALL-SB-0-0-0-CZ-0003-2025
Front undercarriage inspection
Mandatory Service Bulletin
Visual inspection of the front undercarriage leg and fork for possible cracks, especially around welds and for deformation.
- Emesso
- 14.07.2025
- Interessati
- All models with fixed tricycle landing gear
- Obbligatorio
N. bollettino
ALL-SB-0-0-0-0-0001-2025
Rivets check inside of the frame
Mandatory Service Bulletin — Safety Directive/Alert
Missing rivets were found in the internal fuselage structure.
- Emesso
- 04.02.2025
- Interessati
- Affected models and serial numbers listed in the bulletin (PDF)
- Obbligatorio
N. bollettino
ALL-SB-0-0-0-DE-0002-2024
GERMANY ONLYControl surfaces deflection
Mandatory Service Bulletin
It was found that the deflections of the ailerons are not in the specified range. Measurement/adjustment of control surfaces deflections.
- Emesso
- 19.07.2024
- Interessati
- All models listed in German Kennblatt 66253: • LSA, LSA-915 • LSA-K,LSA-K-RG,LSA-K-915,LSA-K-RG-915
- Obbligatorio
N. bollettino
ALL-SA-5-0-0-ALL-0001-2024
ROTAX 912 IS Engine Attachment
SAFETY DIRECTIVE/ALERT
Engine attachment inspection, screw replacement. Kontrola uchycení motoru, výměna šroubů.
- Emesso
- 08.02.2024
- Interessati
- All models equipped with Rotax 912 iS engine and the original one-piece engine mount.
- Obbligatorio
N. bollettino
22112 Rev. A
Automatic Trim/GDU™ 4XX Reset
Mandatory Service Bulletin
In G3X, G3X Touch, and G5 systems with GSA 28 autopilot servos connected to trim actuators, an uncommanded automatic trim runaway may occur when the autopilot is first engaged. Software update required
- Emesso
- 28.11.2022
- Interessati
- All Bristell experimental, ultralight, and Light-Sport Aircraft fitted G3X, G3X Touch, and G5 systems
- Obbligatorio
N. bollettino
ALL-SA-0-0-0-ALL-0002-2021
Seat attachment
Safety directive/Safety alert
Seat attachment brackets replacement. Výměna konzol uchycení sedačky.
- Emesso
- 11.11.2021
- Interessati
- All UL and LSA models of BRISTELL
- Obbligatorio
N. bollettino
ALL-SA-0-0-0-0001-2020
AOI revision
Safety Alert Directive
Change of crew arm for aeroplane C.G. calculation. (Rev.1 – Re-classification to Safety Directive on FAA request) Rev.2: MAC origin distance correction
- Emesso
- 07.08.2020 · rev. 07.12.2022
- Interessati
- All BRISTELL aircraft.
- Obbligatorio
N. bollettino
ALL-SA-0-0-0-0005-2020
KAVLICO PRESSURE SENSORS
Safety Alert
Potential leak of Kavlico pressure sensors Možný únik snímačů tlaku Kavlico
- Emesso
- 11.05.2020
- Interessati
- All BRISTELL aircraft fitted with Kavlico pressure sensors.
- Obbligatorio
N. bollettino
ALL-SA-3-0-5-0001-2017
ELEVATOR CONTROL STUCK
Safety Alert
Elevator servo rod check Kontrola táhla serva výškovky
- Emesso
- 05.10.2017
- Interessati
- All BRISTELL aircraft fitted with Rotax 912 iS, iS Sport, Rotax 914 engines and an autopilot.
Nessun bollettino corrisponde alla ricerca. Cancelli la ricerca o selezioni Tutti i modelli.